Maple Reviews

Free Toy Felt Scottie Dog Sewing Pattern

Approximate height: 7 1/2″

Materials required:

• Pattern
• Felt: 30″ x 12″ Black
• Felt: Small piece of red for tongue
• Stranded cotton: 1 skein Black
• Pair Brown Glass Eyes
• Short length of ribbon for Dog collar
• Wire – 16 Gauge – 2 pieces each 12″ long
• Filling

Download Toy Scottie Dog Sewing Pattern = >>>
(requires Adobe Acrobat Reader)

Preparation

Cut 2 side body, 2 underbody, 2 ear, 1 head gusset, 4 sole, 1 nose and 1 red tongue. Prepare wire for legs (see General Instructions).

How to make the felt toy Scottie Dog – Sewing instructions

All seams are glove stitched on the right side unless otherwise stated.

Using two strands of cotton, join underbody seam from A to B on the wrong side. Join the two side bodies from G to A. Insert the head gusset and join to side bodies from G over the head to I.

Join seams along the back to H and over the tail to B. Join underbody to side body from A to E and from B to F. Join legs C to J and D to K.

Stitch a sole into the base of each foot, placing X of sole to the back. Push a little stuffing into each foot. Bend the wire to shape insert into the legs and stuff.

Join underbody to sidebody from J to K and then complete the stuffing.

Stitch the remaining seam from J to K.

Sew the ears on each side of the head as position marked on Pattern. Sew in eyes (see General Instructions). Stitch nose darts and sew into position. Sew tongue in place on lower edge of nose piece.

Tie a ribbon bow around the Dog’s neck.

Woof!

Free Felt Toy Mouse Sewing Pattern

Approximate height: 3″ long

Materials required:

• Pattern
• Felt: 12″ x 10″ Grey
• Filling
• Cardboard stiffener

Download Free Toy Mouse Sewing Pattern
(requires Adobe Acrobat Reader)

Preparation

Cut 2 body sides, 1 overbody, 1 underbody, 2 ear and 1 tail. Cut 1 cardboard stiffener for underbody.

How to make the felt toy Mouse – Sewing instructions

All seams are glove stitched on the right side.

Using two strands of cotton, join overbody to body from B to A; next join underbody to body from B to A and insert the cardboard stiffener.

Stuff the mouse quite firmly and stitch the seam. Fold ears in half and stitch into position as in photograph.

Fold tail lengthways and stitch from C to D, sew X on tail to X on overbody.

For whiskers sew three long black stitches each side of nose. Stitches for eyes in pink or suitable colour cotton.

Squeak!!!

Free Toy Felt Monkey Sewing Pattern

Approximate height: 13″

Materials required:

• Pattern
• Felt: Brown 31″ x 12″
• Felt: Fawn 6″ x 8″
• Felt: Small piece yellow for banana
• Stranded cotton: 1 skein each of Brown, Fawn and Yellow
• 1 x pair brown glass eyes
• 4 ft. 16 gauge wire
• Filling
• Adhesive tape (sellotape/sticky tape – only need a short bit)

Download monkey sewing pattern free = >>>
(requires Adobe Acrobat Reader)

Preparation

From the brown felt cut 1 underbody, 1 tail, 2 body, 2 ear, 1 head gusset, 2 hand, 2 foot.

From the fawn felt cut 2 ear, 2 hand, 2 foot, 1 face.

Cut one yellow banana.

How to make the felt Monkey toy – Sewing instructions

All seams are glove stitched on the right side unless otherwise stated. Using two strands of cotton, join one body piece to under- body from A to B, from C to D, and from E to F. Join the second body piece to the underbody in the same manner.

Sew in the head gusset to each body piece from G to H. Continuing down the back to opening for stuffing. Sew from A to J. Sew the face from K to L on the wrong side and make 2 eye slits 3/16″ long. Before joining face to body, sew a small piece of felt behind the eyes, catching both sides of face with small stitches. This will stop eyes receding too far into head. Turn the body inside out and sew in face on wrong side from K to M and back to K. Turn right side out. Sew the two piece for each hand from C to B. Join the hands neatly to the arms, placing B to B and C to C. The feet are made in the same way as the hands, and sewn to the legs, placing D to D and E to E.

Prepare the wire for arms and legs (see General Instructions). 16 1/2″ are required for the arms and 16 1/2″ for the legs. Lightly stuff the hands and feet before inserting wires. Bend these to shape for arms and legs, insert into body, and complete the stuffing. Sew up the opening. Sew the tail and lightly stuff the end. Bend a 10″ piece of wire to curve slightly at one end, binding each end with adhesive tape. Insert wire into tail, stuff and close the seam. Join tail to body where indicated to pattern.

Emphasize the Monkey’s lower lip by back-stitching round the edge of the fawn felt with brown stranded cotton, as in the photograph, then work another line of backstitches just above to indicate upper lip. Suggest the nose with a few short stitches.

Sew in the eyes (see General Instructions) placing the top of the eye just under the slit in the felt to suggest the eyelid. Work a line of backstitches from the inner corner of each eye for 3/4″ to accentuate the nose (as in photo). Make the ears, sewing from N to P and attach to head where indicated on pattern. Mark the division of the fingers and toes with backstitches, taking the stitches through the double thickness of felt.

Oooo Oooo!!

Free Toy Felt Koala Sewing Pattern

Approximate height: 10″

Materials required:

Pattern

• Felt: Grey 30″ x 12″
• Felt: Black 6″ x 6″
• Stranded cotton: 1 skein each Red, Blue, Grey and Black
• Pair Brown Glass Eyes
• Filling

Download Free Koala Sewing Pattern =>>>
(requires Adobe Acrobat Reader)

Preparation

From the grey felt cut 2 side body, 1 front head, 1 back of head, 1 chest piece. From the black felt cut 1 nose and 4 claws.

How to make the felt toy Koala – Sewing instructions

All seams are glove stitched on the right side unless otherwise stated.

Sew nose seam on face on wrong side from A to B. Now turn to right side.

Stitch darts on wrong side of black nose piece. Turn to right side, place on nose seam and stitch into position 1/4″ below A. Join front head piece to back head piece from C, over the head to C.

Join side bodies down from D to E. Place right side of back and front arm pieces together with one black claw piece in between. Join at the section marked “claw” by oversewing the three thicknesses together on the wrong side.

Complete the other three claws in the same manner.

With the body wrong side out, place the head inside, stitch the head to the body at neck – matching B to B, D to D, G to G, and C to C. Turn the toy right side out – pull claws out to shape.

Join from G at neck around arms and legs to F.

Stuff the toy with filling, ears first – very softly, then the remainder firmly. Finish sewing around the base from F to F. A few blind stitches along the ears will keep the filling in place.

Sew in the eyes (see General Instructions). Tie a bow of ribbon around Koala’s neck.

G’day mate!

Free Kangaroo with Joey Sewing Pattern

Approximate height: 16″

Materials required:

• Pattern
• Felt: Fawn 30″ x 18″
• Stranded cotton: 2 skeins Fawn, 1 skein each Black and Brown
• Wire – 24″ piece of 16 Gauge
• Pair Brown Glass Eyes
• Filling

Download Free Kangaroo Sewing Pattern with Joey = >>>
(requires Adobe Acrobat Reader)

Preparation

Cut 2 body sides, 2 inside leg, 2 ear, 1 chest piece and 1 head inset.

How to make the felt Kangaroo toy – Sewing instructions

All seams are glove stitched on the right side unless otherwise stated.

Fold arm darts on dotted line and saw on wrong side with small running stitches following the curved line on pattern of the chest piece.

Fold on the dotted line for pocket matching A to A, and sew up each side to complete the pocket. Join one inside leg piece to each chest piece from A to B on wrong side.

Join each body side piece to the completed chest starting from C to A around to B, leave open for stuffing.

Join seam from C under neck to D, place head inset D to D and join seams over the head to E, at the same time fold and stitch ears firmly into position where marked on pattern. Prepare the wire for legs (see General Instructions).

Push a little stuffing down the end of each foot. Push wire down the legs and feet, pack stuffing around the wire to a nice smooth finish. Join the seam from E down the back and around the tail. Stuff firmly and stitch the under tail seam.

Stitch the eyes. Stitches for nose, paws and feet in brown cotton (see General Instructions).

Preparation – Joey (Baby kangaroo!)

Cut 2 side body, 1 chest piece and 1 small diamond head inset.

Sewing method – Joey

Sew darts of chest piece on the wrong side where indicated. For inside leg join each side body to chest piece from A around B, then around tail to back. Join around nose from A to C. Insert small diamond head inset between ears with the point meeting C and stitch into position. Lightly stuff the Joey and stitch up the back. Make stitches for eyes in black.

Boing, boing!

Free Felt Toy Elephant Sewing Pattern

Approximate height: 7 1/2″

Materials required:

• Pattern
• Felt: 30″ x 10″ Dark Grey
• Felt: 8″ x 5″ Red
• Felt: 2″ x 2″ White
• Stranded cotton: 1 skein each, Dark Grey and White
• Pair Brown Glass Eyes
• 16 Gauges Wire for legs and trunk 40″
• Gold Braid 18″
• Filling
• Pinking shears

Download Elephant free sewing pattern = >>> (upcoming)
(requires Adobe Acrobat Reader)

Preparation

Place all the pattern pieces (except he Tusks and Harness Cloth) onto the grey felt and cut the shapes carefully. Cut 4 ear, 2 main body, 2 underbody, 4 sole, 1 under-trunk gusset, 1 back gusset and 1 tail.

Cut 4 tusks in white felt. From red felt, cut out harness cloth 8″ x 3 1/2″, cut understrap 6″ x 1″ with pinking shears.

Cut wire into three pieces, 10″, 15″, 15″ and prepare the two longest pieces for legs (see General Instructions) bind the end of the 10″ piece for the trunk.

How to make the felt toy Elephant – Sewing instructions

All seams are glove stitched on the right side unless otherwise stated.

Using two strands of dark grey cotton, join underbody pieces together from C to E on the wrong side.

Join the back gusset to one of the body pieces from D over the head along the back matching D and B. Join the second body piece to back gusset in the same manner.

Join under-trunk gusset to underbody from A across E to A on the wrong side. Join trunk from D around F, insert point of under-trunk gusset F, and join from F to A on each side. Continue to A, joining underbody to main body down each front leg.

Join back of each front leg from O to G, and sew in the front soles.

Join end of back gusset to underbody from B across to C to B on the wrong side.

Push a little stuffing down to the end of the trunk and two front legs. Join one end of the 10″ wire to the centre arch of the front wire legs. Push the wire down the trunk and legs, pack the stuffing around the wires.

Join the seams and soles on each back leg, wire and stuff. Join main body and underbody seam from O to N, complete the stuffing and stitch the remaining seam from O to N.

Join each pair of ears together from L around to M. Sew the ears on each side of the head in the position marked on the pattern.

Sew in the eyes (see General Instructions). Join each pair of tusks with white cotton, stuff firmly, close the opening and stitch into position as in pattern.

Fold the tail lengthways adding a few strands of dark grey cotton inside and to hang about 1″ from the felt. Stitch down the tail, and with the seam to the back stitch into position matching X to X.

Sew gold braid around harness cloth, about 1/2″ from the outer edge.

Join the 1″ strip of red felt for understrap to lower edge of cloth. Place the cloth on the Elephant’s back and pass the other end of the strip under the body. Join to corresponding side (see photograph).

Trumpet!!